25021-08-3| - Page 7 of 12 - Heterocyclic Building Blocks-Pyrrolines

Little discovery in the laboratory: a new route for 25021-08-3

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 25021-08-3

25021-08-3, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.25021-08-3, name is 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid. An updated downstream synthesis route of 25021-08-3 as follows.

N-[(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetyl]-beta-alanine The title compound was prepared from commercially available (2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid by coupling with tert-butyl beta-alaninate hydrochloride (1:1) in the presence of EDCI/HOBt and N,N-diisopropylethylamine and subsequent deprotection with trifluoroacetic acid. LC-MS (Method 1): Rt=0.32 min; MS (ESIpos): m/z=227 (M+H)+.

Reference£º
Patent; Bayer Pharma Aktiengesellschaft; LERCHEN, Hans-Georg; REBSTOCK, Anne-Sophie; CANCHO GRANDE, Yolanda; MARX, Leo; STELTE-LUDWIG, Beatrix; TERJUNG, Carsten; MAHLERT, Christoph; GREVEN, Simone; SOMMER, Anette; BERNDT, Sandra; (684 pag.)US2018/169256; (2018); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

Flexible application of 144222-34-4 in synthetic route

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid, you can also browse my other articles.

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.25021-08-3, name is 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid. An updated downstream synthesis route of 25021-08-3 as follows., 25021-08-3

250 mg (1.07 mmol) of tert-butyl 3-[2-(2-aminoethoxy)ethoxy]propanoate, 151 mg (0.974 mmol) of 2-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid, 224 mg (1.46 mmol) of 1-hydroxy-1H-benzotriazole hydrate and 224 mg (1.17 mmol) of 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride were dissolved in 5.0 ml of dimethylformamide. The reaction mixture was stirred at RT for 1 h. Ethyl acetate was added and the mixture was extracted twice with 5% strength citric acid solution and with saturated sodium bicarbonate solution. The organic phase was washed twice with saturated sodium chloride solution and dried over magnesium sulphate, and the solvent was evaporated under reduced pressure. The residue was purified by preparative RP-HPLC (column: Reprosil 250*40; 10mu, flow rate: 50 ml/min, MeCN/water/0.1% TFA). The solvents were evaporated under reduced pressure and the residue was dried under high vacuum. This gave 267 mg (64% of theory) of tert-butyl 3-[2-(2-{[(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetyl]amino}ethoxy)ethoxy]propanoate. LC-MS (Method 1): Rt=0.73 min; MS (ESIpos): m/z=371 (M+H)+.

Fun Route: New Discovery of 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid

250 mg (1.07 mmol) of tert-butyl 3-[2-(2-aminoethoxy)ethoxy]propanoate, 151 mg (0.974 mmol) of 2-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid, 224 mg (1.46 mmol) of 1-hydroxy-1H-benzotriazole hydrate and 224 mg (1.17 mmol) of 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride were dissolved in 5.0 ml of dimethylformamide. The reaction mixture was stirred at RT for 1 h. Ethyl acetate was added and the mixture was extracted twice with 5% citric acid solution and with saturated sodium hydrogencarbonate solution. The organic phase was washed twice with saturated sodium chloride solution and dried over magnesium sulphate, and the solvent was evaporated off under reduced pressure. The residue was purified by preparative RP-HPLC (column: Reprosil 250*40; 10mu, flow rate: 50 ml/min, MeCN/water/0.1% TFA). The solvents were evaporated under reduced pressure and the residue was dried under high vacuum. This gave 267 mg (64% of theory) of tert-butyl 3-[2-(2-{[(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetyl]amino}ethoxy)ethoxy]propanoate. LC-MS (Method 1): Rt=0.73 min; MS (ESIpos): m/z=371 (M+H)+., 25021-08-3

Reference£º
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; LERCHEN, Hans-Georg; REBSTOCK, Anne-Sophie; MARX, Leo; JOHANNES, Sarah Anna Liesa; STELTE-LUDWIG, Beatrix; DIETZ, Lisa; TERJUNG, Carsten; MAHLERT, Christoph; GREVEN, Simone; SOMMER, Anette; BERNDT, Sandra; (481 pag.)US2019/77752; (2019); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

Little discovery in the laboratory: a new route for 25021-08-3

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 25021-08-3, you can also browse my other articles.

25021-08-3, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.25021-08-3, name is 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid, below Introduce a new synthetic route.

Trifluoroacetic acid/L-alanyl-N5-carbamoyl-N-(4-{[(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetyl]amino}phenyl)-L-ornithinamide (1:1) The title compound was prepared from 1,4-phenylenediamine sequentially according to classical methods of peptide chemistry. In the first step, 942 mg (8.72 mmol) of 1,4-phenylenediamine were monoacylated with 0.8 g (2.9 mmol) of N2-(tert-butoxycarbonyl)-N5-carbamoyl-L-ornithine in the presence of HATU and N,N-diisopropylethylamine. In the second step, in an analogous manner, the second anilinic amino group was acylated with (2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid in the presence of HATU and N,N-diisopropylethylamine. Deprotection with TFA, coupling with 2,5-dioxopyrrolidin-1-yl N-(tert-butoxycarbonyl)-L-alaninate and another deprotection with TFA then gave, in 3 further synthesis steps, the title compound, 148 mg of which were obtained by this route. LC-MS (Method 1): Rt=0.21 min; MS (ESIpos): m/z=474 (M+H)+. LC-MS (Method 4): Rt=0.2 min; MS (ESIpos): m/z=474 (M+H)+.

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 25021-08-3, you can also browse my other articles.

Reference£º
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; LERCHEN, Hans-Georg; REBSTOCK, Anne-Sophie; CANCHO GRANDE, Yolanda; WITTROCK, Sven; BERNDT, Sandra; GRITZAN, Uwe; FITTING, Jenny; STELTE-LUDWIG, Beatrix; JONES, Patrick; MAHLERT, Christoph; VOTSMEIER, Christian; SCHOeNFELD, Dorian; TRAUTWEIN, Mark; WEBER, Ernst; PAWLOWSKI, Nikolaus; GREVEN, Simone; GLUeCK, Julian Marius; HAMMER, Stefanie; DIETZ, Lisa; MAeRSCH, Stephan; (357 pag.)US2020/138970; (2020); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

The effect of the change of 1,2,3,4,5-Pentamethylcyclopenta-1,3-diene synthetic route on the product

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid, you can also browse my other articles.

25021-08-3, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.25021-08-3, name is 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid. A new synthetic method of this compound is introduced below.

The carboxylic acid of ligand HL was activated according to a published procedure [16] . Briefly, a solution of HL (48?mg, 0.309?mmol) and DCC (64?mg, 0.309?mmol), dissolved in 1?mL of anhydrous DMF, was sonicated in an ultrasonic bath for 15?min at room temperature. The colorless solution became dark red and a white solid (dicyclohexylurea, DCU) precipitated. Then the precipitate was separated by centrifugation and the supernatant was added very slowly (dropwise for 30?min) to a suspension of (OC-6-44)-diamminedichloridohydroxido(2-hydroxyethanolato)platinum(IV), 2, (100?mg, 0.276?mmol) in 5?mL of anhydrous DMF. The reaction was carried out overnight at room temperature. The mixture was then cooled to -20?C for about 30?min and the precipitate was eliminated by filtration (PTFE filter with a porosity 0.45?mum). The solvent was evaporated by a rotary evaporator and the yellow oil obtained was dissolved in ultrapure water, in order to allow the precipitation of the remained DCU. The yellow solution was filtered (0.45?mum porosity), the water was removed under reduced pressure and the reaction product was precipitated with acetone/diethyl ether and then dried in vacuo. Yield: 83?mg (60%). 1H NMR (D2O) delta: 1.19 (t, 3H, -OCH2CH3, 3J?=?6.95?Hz), 3.43 (q, 2H, -OCH2CH3, 3J?=?6.95?Hz), 4.39 (s, 2H, -OCOCH2), 6.97 (s, 2H, -NCOCH=CH) ppm; 13C NMR (D2O) delta: 16.1 (-OCH2CH3), 40.0 (-OCOCH2), 67.7 (-OCH2CH3), 134.7 (-NCOCH=CH), 172.4 (-NCOCH=CH), 176.3 (-OCOCH2) ppm; 195Pt NMR (D2O) delta: 904?ppm (multiplet of five lines, 1JPt-N?=?197.4?Hz). ESI-MS (positive ion mode): 500?m/z [M?+?H]+, calcd for C8H16Cl2N3O5Pt [M?+?H]+ 500?m/z. Elem. Anal. found: C 19.58; H 3.24; N 8.13%.; calcd. for C8H15Cl2N3O5Pt: C 19.25; H 3.03; N 8.42%., 25021-08-3

Reference£º
Article; Gabano, Elisabetta; Perin, Elena; Bonzani, Diego; Ravera, Mauro; Inorganica Chimica Acta; vol. 488; (2019); p. 195 – 200;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

Fun Route: New Discovery of Tri-tert-butyl 1,4,8,11-tetraazacyclotetradecane-1,4,8-tricarboxylate

A suspension of 2,5-dihydro-2,5-dioxopyrrol-1-ylacetic acid (821 mg) in thionyl chloride (15.9 ml) was heated under reflux for 0.5 hours and the excess thionyl chloride was removed under vacuum. The residue was evaporated twice with dry toluene to afford 2,5-dihydro-2,5-dioxopyrrol-1-ylacetyl chloride [(5) where m=1] as a colourless, readily hydrolyzed liquid. (The compound has been prepared previously by a less convenient route5).

Reference£º
Patent; Medical Research Council; US5434272; (1995); A;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

Fun Route: New Discovery of 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.25021-08-3, name is 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid, below Introduce a new synthetic route., 25021-08-3

N-[(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetyl]-L-valyl-N-{3-[{(1R)-1-[1-benzyl-4-(2,5-difluorophenyl)-1H-pyrrol-2-yl]-2,2-dimethylpropyl}(glycoloyl)amino]propyl}-L-alaninamide The title compound was prepared from Example M9 first by coupling to N-[(benzyloxy)carbonyl]-L-valyl-L-alanine in the presence of HATU and N,N-diisopropylethylamine. In the next step, the Z protecting group was removed by hydrogenating over 10% palladium on activated carbon at RT under hydrogen standard pressure for 1 hour and then converting the deprotected intermediate to the title compound by coupling to (2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid in the presence of HATU and N,N-diisopropylethylamine. LC-MS (Method 1): Rt=1.21 min; MS (ESIpos): m/z=777 (M+H)+., 25021-08-3

Little discovery in the laboratory: a new route for 25021-08-3

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 2-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid. We look forward to the emergence of more reaction modes in the future.

1-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)-2-oxo-6,9,12,15,18,21,24,27-octaoxa-3-azatriacontan-30-oic acid Tert-Butyl 1-amino-3,6,9,12,15,18,21,24-octaoxaheptacosan-27-oate (100 mg, 201 mumol) was initially charged in 1.0 ml of DMF and (2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid (46.8 mg, 301 mumol), 1-hydroxy-1H-benzotriazole hydrate (76.9 mg, 502 mumol) and 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (77.0 mg, 402 mumol) were added. The reaction mixture was stirred overnight at RT and then ethyl acetate was added. The organic phase was washed twice with 5% citric acid solution, with sat. sodium hydrogen carbonate solution and then with sat. sodium chloride solution. The organic phase was dried over magnesium sulfate. The solvents were evaporated under vacuum and the residue purified by prep. RP-HPLC (column: Reprosil 125*30; 10mu, flow: 50 mL/min, MeCN/water/0.1% TFA). The solvents were evaporated under vacuum and the residue dried under high vacuum. This gave 19.1 mg (13% of theory) of the compound tert-Butyl 1-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)-2-oxo-6,9,12,15,18,21,24,27-octaoxa-3-azatriacontan-30-oate. LC-MS (Method 1): Rt=0.87 min; MS (ESIpos): m/z=635 [M+H]+, 25021-08-3

Little discovery in the laboratory: a new route for 25021-08-3

250 mg (1.07 mmol) of tert-Butyl 3-[2-(2-aminoethoxy)ethoxy]propanoate, 151 mg (0.974 mmol) of 2-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid, 224 mg (1.46 mmol) of 1-hydroxy-1H-benzotriazole hydrate and 224 mg (1.17 mmol) of 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride were dissolved in 5.0 ml of dimethylformamide. The reaction mixture was stirred at RT for 1 h. Ethyl acetate was added and the mixture was extracted twice with 5% strength citric acid solution and with saturated sodium bicarbonate solution. The organic phase was washed twice with saturated sodium chloride solution and dried over magnesium sulphate, and the solvent was evaporated under reduced pressure. The residue was purified by preparative RP-HPLC (column: Reprosil 250*40; 10mu, flow rate: 50 ml/min, MeCN/water/0.1% TFA). The solvents were evaporated under reduced pressure and the residue was dried under high vacuum. This gave 267 mg (64% of theory) of tert-Butyl 3-[2-(2-{[(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetyl]amino}ethoxy)ethoxy]propanoate. LC-MS (Method 1): Rt=0.73 min; MS (ESIpos): m/z=371 (M+H)+.

The effect of 25021-08-3 reaction temperature change on equilibrium

tert-Butyl 1-amino-3,6,9,12,15,18,21,24-octaoxaheptacosan-27-oate (100 mg, 201 mumol) was initially charged in 1.0 ml of DMF, and (2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid (46.8 mg, 301 mumol), 1-hydroxy-1H-benzotriazole hydrate (76.9 mg, 502 mumol) and 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (77.0 mg, 402 mumol) were added. The reaction mixture was stirred at RT overnight, and ethyl acetate was then added. The organic phase was washed twice with 5% citric acid solution, with saturated sodium hydrogencarbonate solution and once with saturated sodium chloride solution. The organic phase was dried over magnesium sulphate. The solvents were evaporated under reduced pressure and the residue was purified by preparative RP-HPLC (column: Reprosil 125*30; 10mu, flow rate: 50 ml/min, MeCN/water/0.1% TFA). The solvents were evaporated under reduced pressure and the residue was dried under high vacuum. This gave 19.1 mg (13% of theory) of tert-butyl 1-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)-2-oxo-6,9,12,15,18,21,24,27-octaoxa-3-azatriacontan-30-oate. LC-MS (Method 1): Rt=0.87 min; MS (ESIpos): m/z=635 [M+H]+, 25021-08-3