Category: 6913-92-4

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level. 6913-92-4, name is 1-Benzyl-3-pyrroline, introduce a new downstream synthesis route., 6913-92-4

6913-92-4, In a Biotage Initiator 2-5 mL vial, nitrone 1 (392 mg, 1.64 mmol) and N-benzyl-3-pyrroline 2 (314 mg, 1.97 mmol, 1.2 eq) were introduced. The vial was flushed with argon and 2.5 mL of anhydrous toluene was added (c = 0.66 mM). The vial was sealed with a septum cap and was sonicated for 20 s. The resulting mixture was irradiated by microwaves (temperature: 140 C). TLC monitoring (EtOAc) showed full conversion after 2 h. After the crude mixture was concentrated, the crude product was purified by flash silica gel column chromatography (EtOAc) to afford cycloadduct 3 (625 mg, 1.57 mmol, 96%) with no traces of other isomer. Monocrystals ofcompounds 3 were obtained from a saturated Et2O solution cooledin a freezer. Rf 0.48 (EtOAc). [a]D 40.4 (c 1.1, CH2Cl2). 1H NMR(400 MHz, CDCl3) d 7.37e7.20 (m, 5H, CH-ar), 4.59 (td,1H, J 7.0 Hz,J 3.0 Hz, H-4), 3.71e3.49 (m, 3H, NCH2Ph, H-6), 3.42 (dd, 1H,J 10.3 Hz, J 6.6 Hz, H-3), 2.78 (dd, 1H, J 10.3 Hz, J 3.0 Hz, H-5), 2.75e2.69 (m, 4H, NCH3, H-2), 2.65 (dd, 1H, J 9.4 Hz, J 3.7 Hz,H-20), 2.58 (dd, 1H, J 9.9 Hz, J 6.6 Hz, H-50), 2.14e2.08 (m, 1H, H-9), 2.00 (dtt, 1H, J 12.9 Hz, J 6.5 Hz, J 3.3 Hz, H-10), 1.90e1.78(m, 2H, H-11, H-12), 1.68e1.59 (m, 1H, H-120), 1.48 (dt, 1H,J 13.5 Hz, J 6.7 Hz, H-15), 1.38 (dd, 1H, J 12.1 Hz, J 3.2 Hz, H-13), 1.18 (t, 1H, J 12.3 Hz, H-90), 0.95e0.85 (m, 10H, H-11?, H-14, H-16). 13C NMR (100 MHz, CDCl3) d 172.8 (C]O), 138.9 (C-ar), 128.6(CH-ar), 128.3 (CH-ar), 127.1 (CH-ar), 88.0 (C-8), 79.6 (C-4), 71.9 (C-6), 59.6 (NCH2Ph), 59.4 (C-5), 59.3 (C-2), 49.1 (C-3), 48.2 (C-13), 41.0(C-9), 35.0 (C-11), 29.0 (C-10), 25.9 (NCH3), 24.5 (C-15), 24.2 (CH3),22.6 (C-12), 22.4 (CH3), 18.7 (CH3). HR-ESI-QToF MS (positivemode): m/z calcd for C24H36N3O2 [MH]: 398.2802, found:398.2806.

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 6913-92-4. We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Cecioni, Samy; Aouadi, Kaiss; Guiard, Julie; Parrot, Sandrine; Strazielle, Nathalie; Blondel, Sandrine; Ghersi-Egea, Jean-Francois; Chapelle, Christian; Denoroy, Luc; Praly, Jean-Pierre; European Journal of Medicinal Chemistry; vol. 98; (2015); p. 237 – 249;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level. 6913-92-4, name is 1-Benzyl-3-pyrroline, introduce a new downstream synthesis route., 6913-92-4

6913-92-4, Was synthesised according to published methods:. To a solution of 1-benzyl-3-pyrroline (5.0 g, 31.40 mmol) in methanol (20 ml) cooled at 0C, water was added (5 ml) and H2S04 96% (2 ml). The solution was stirred 5 min. and 3-chloroperoxybenzoic acid (10.0 g, 40.56 mmol) was added in portions. The suspension was stirred at r.t. for 18 h. Methanol was evaporated and the aquose solution was neutralized with aq. NaOH 10 % until pH=7. The suspension was extracted with dichloromethane and the organic phase was washed with water and saturated solution of NaCl, dried over Na2SO4, filtered and concentrated to afford pure product (4.35 g, 80%) as yellow oil. 1H NMR (400 MHz, CDCl3): delta (ppm) 7.49-7.23 (m, 5H), 3.81 (s, 2H), 3.66 (s, 2H), 3.23 (d, J=12Hz, 2H), 2.72 (d, J=12Hz, 2H).

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 6913-92-4. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Laboratorios del Dr. Esteve S.A.; EP1849781; (2007); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level. 6913-92-4, name is 1-Benzyl-3-pyrroline, introduce a new downstream synthesis route., 6913-92-4

General Procedure for the synthesis of Pauson-Khand adducts. To a solution of the acetylene (1.1 eq) (of general formula III (see above)) in 1,2-dichloroethane, was added Co2(CO)8 (1.1 eq) and the mixture was stirred 2 hours at room temperature. A solution of the pyrroline (1 eq) (of general formula II (see above and different examples 0 below)) in 1,2-dichloroethane and the additive (dimethylsulfoxide or cyclohexylamine) (3.5 eq) were added and the mixture was heated at 83C for 20 hours. The reaction mixture was filtered through celite and washed with CH2Cl2. The filtrate was concentrated and the crude was purified by flash chromatography. From phenylacetylene (5.0 g, 48.3 mmol), Co2(CO)8 (16.5 g, 48.3 mmol), 1-benzyl-3-pyrroline (7.0 g, 43.9 mmol), dimethylsulfoxide (12-0 g, 153.8 mmol) and 1,2-dichloroethane (200 ml). Purification: silica gel, gradient dichloromethane to dichloromethane:methanol 1%, afforded the product (5.9 g, 46%) as yellow oil. 1H NMR (400 MHz, CDCl3): delta (ppm) 7.72 (m, 2H), 7.65 (d, J=3Hz, 1H), 7.40-7.18 (m, 8H), 3.49-3.63 (AB system, 2H), 3.36 (m, 1H), 3.19 (d, J=9Hz, 1H), 2.94 (m, 1H), 2.83 (d, J=9Hz, 1H), 2.43 (t, J=9Hz, 1H), 2.37 (t, J=9Hz, 1H). 13C NMR (75 MHz, CDCl3) delta (ppm) 208.94, 159.74, 143.79, 138.30, 131.47, 128.45, 128.38, 128.34, 128.18, 58.91, 56.79, 55.89, 50.24, 42.58. MS (El+) m/z: 289.14 (M+)., 6913-92-4

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 6913-92-4. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; LABORATORIOS DEL DR. ESTEVE, S.A.; EP1849770; (2007); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.6913-92-4, name is 1-Benzyl-3-pyrroline. Here is a downstream synthesis route of the compound 6913-92-4. 6913-92-4

(2) To a solution of triethylamine (4.18 mL) and formic acid (0.384 mL) in N,N-dimethylformamide (20mL) were added dichloro[1,1′-bis(diphenylphosphino)ferrocene]palladium(II) dichloromethane adduct (205 mg), Compound 3 (1.90 g), Compound 4 (3.98 g), and N,N-dimethylformamide (10 mL), and the mixture was stirred at 95C for 2 hours. To the reaction mixture were added ethyl acetate and water at room temperature, stirred, and then extracted with ethyl acetate. The resultant organic layer was washed with water, dried, and concentrated under reduced pressure. The residue was purified with silica gel column chromatography (hexane:ethyl acetate=100:0-50:50) to give racemic Compound 5 (1.14 g) as a pale yellow viscous material. MS (APCI): m/z 461 [M+H]+

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 6913-92-4

Reference£º
Patent; Mitsubishi Tanabe Pharma Corporation; YAMAMOTO, Yasuo; SATO, Atsushi; MOROKUMA, Kenji; SHITAMA, Hiroaki; ADACHI, Takashi; MIYASHIRO, Masahiko; (260 pag.)EP3150578; (2017); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

6913-92-4, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.6913-92-4, name is 1-Benzyl-3-pyrroline. Here is a downstream synthesis route of the compound 6913-92-4

To a solution of the acetylene (1.1 eq) in 1,2-dichloroethane, was added CO2(CO)8 (1.1 eq) and the mixture was stirred 2 hours at room temperature. A solution of the pyrroline (1 eq) in 1,2-dichloroethane and the additive (dimethylsulfoxide or cyclohexylamine) (3.5 eq) were added and the mixture was heated at 83C for 20 hours. The reaction mixture was filtered through celite and washed with CH2Cl2. The filtrate was concentrated and the crude was purified by flash chromatography. From phenylacetylene (5.0 g, 48.3 mmol), Co2(CO)8 (16.5 g, 48.3 mmol), 1-benzyl-3-pyrroline (7.0 g, 43.9 mmol), dimethylsulfoxide (12.0 g, 153.8 mmol) and 1,2-dichloroethane (200 ml). Purification: silica gel, gradient dichloromethane to dichloromethane:methanol 1%, afforded the product (5.9 g, 46%) as yellow oil. 1H NMR (400 MHz, CDCl3): delta (ppm) 7.72 (m, 2H), 7.65 (d, J=3Hz, 1H), 7.40-7.18 (m, 8H), 3.49-3.63 (AB system, 2H), 3.36 (m, 1H), 3.19 (d, J=9Hz, 1H), 2.94 (m, 1H), 2.83 (d, J=9Hz, 1H), 2.43 (t, J=9Hz, 1 H), 2.37 (t, J=9Hz, 1 H). 13C NMR (75 MHz, CDCl3) delta (ppm) 208.94, 159.74, 143.79, 138.30, 131.47, 128.45, 128.38, 128.34, 128.18, 58.91, 56.79, 55.89, 50.24, 42.58. MS (El+) m/z: 289.14 (M+).

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 1-Benzyl-3-pyrroline. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; LABORATORIOS DEL DR. ESTEVE, S.A.; EP1849772; (2007); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

6913-92-4, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.6913-92-4, name is 1-Benzyl-3-pyrroline. A new synthetic method of this compound is introduced below.

Example 16 2-benryl-5-tert butyl-1,2,3,3a-tetrahydrocyclopenta[c]pyrrol-4(6aH)-one. To a solution of 3,3-dimethyl-1-butyne (29 mg, 0.34 mmol) in 1,2-dichloroethane (1ml) cooled at 0C was added CO2(CO)8 (118 mg, 0.34 mmol) and the mixture was stirred 15 min at 0C and 40 minutes at room temperature. A solution of 1-benzyl-3-pyrroline (50 mg, 0.31 mmol) in 1,2-dichloroethane (1 ml) and dimethylsulfoxide (72 mul, 1.01 mmol) were added and the mixture was heated at 83C for 20 hours. The reaction mixture was filtered through celite and washed with CH2Cl2. The filtrate was concentrated and the crude was purified by flash chromatography: silica gel, dichloromethane, to afforded the product (11 mg, 13%) as yellow oil. 1H NMR (400 MHz, CDCl3): delta (ppm) 7.29-7.17 (m, 5H), 7.08 (d, J=3Hz, 1H), 3.59-3.47 (AB system, 2H), 3.17 (m, 1H), 3.04 (d, J=9Hz, 1H), 2.72 (m, 1H), 2.68 (d, J=9Hz, 1H), 2.35 (t, J=9Hz, 1H), 2.30 (t, J=9Hz, 1H), 1.20 (s, 9H). 13C NMR (75 MHz, CDCl3) delta (ppm) 209.28, 156.44, 154.52, 128.27, 128.19, 126.88, 58.69, 58.78, 56.15, 50.23, 42.00, 31.72, 28.33,. MS (El+) m/z: 269.17 (M+).

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 6913-92-4, you can also browse my other articles.

Reference£º
Patent; LABORATORIOS DEL DR. ESTEVE, S.A.; EP1849772; (2007); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.6913-92-4, name is 1-Benzyl-3-pyrroline, below Introduce a new synthetic route., 6913-92-4

6913-92-4, A mixture of 0.675 g (3.14 mMol) 7-bromo-5-fluorobenzofuran, 5.0 g (31.40 mMol)1-benzyl-3-pyrroline, 2.19 mL (12.56 mMol), N,N-diisopropylethylamine, 0.399 g (9.42 mMol) LiCl, 0.154 g (0.66 mMol) tri-2-furylphosphine, and 0.070 g (0.314 mMol) palladium diacetate in 10 mL N,N-dimethylformamide was heated under nitrogen at 100C for 48 hours. The mixture was diluted with 10 mL diethyl ether and filtered through celite. The filtrate was concentrated under reduced pressure and the oily residue was submitted to kugelrohr distillation to remove most of the pyrrole and pyrrolidine side-products. Flash chromatography of the residue (Et3N/Et2O/hexane 1:39:60) yielded 1-benzyl-3-(5-fluorobenzofur-7-yl)pyrrolidine (173 mg, 19%) as a colorless oil. HRMS calculated for C19H19FNO: 296.1450; found: 296.1437

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 1-Benzyl-3-pyrroline

Reference£º
Patent; ELI LILLY AND COMPANY; EP1204659; (2003); B1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

6913-92-4, 1-Benzyl-3-pyrroline is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

6913-92-4, In a Biotage Initiator 2-5 mL vial, nitrone 1 (392 mg, 1.64 mmol) and N-benzyl-3-pyrroline 2 (314 mg, 1.97 mmol, 1.2 eq) were introduced. The vial was flushed with argon and 2.5 mL of anhydrous toluene was added (c = 0.66 mM). The vial was sealed with a septum cap and was sonicated for 20 s. The resulting mixture was irradiated by microwaves (temperature: 140 C). TLC monitoring (EtOAc) showed full conversion after 2 h. After the crude mixture was concentrated, the crude product was purified by flash silica gel column chromatography (EtOAc) to afford cycloadduct 3 (625 mg, 1.57 mmol, 96%) with no traces of other isomer. Monocrystals ofcompounds 3 were obtained from a saturated Et2O solution cooledin a freezer. Rf 0.48 (EtOAc). [a]D 40.4 (c 1.1, CH2Cl2). 1H NMR(400 MHz, CDCl3) d 7.37e7.20 (m, 5H, CH-ar), 4.59 (td,1H, J 7.0 Hz,J 3.0 Hz, H-4), 3.71e3.49 (m, 3H, NCH2Ph, H-6), 3.42 (dd, 1H,J 10.3 Hz, J 6.6 Hz, H-3), 2.78 (dd, 1H, J 10.3 Hz, J 3.0 Hz, H-5), 2.75e2.69 (m, 4H, NCH3, H-2), 2.65 (dd, 1H, J 9.4 Hz, J 3.7 Hz,H-20), 2.58 (dd, 1H, J 9.9 Hz, J 6.6 Hz, H-50), 2.14e2.08 (m, 1H, H-9), 2.00 (dtt, 1H, J 12.9 Hz, J 6.5 Hz, J 3.3 Hz, H-10), 1.90e1.78(m, 2H, H-11, H-12), 1.68e1.59 (m, 1H, H-120), 1.48 (dt, 1H,J 13.5 Hz, J 6.7 Hz, H-15), 1.38 (dd, 1H, J 12.1 Hz, J 3.2 Hz, H-13), 1.18 (t, 1H, J 12.3 Hz, H-90), 0.95e0.85 (m, 10H, H-11?, H-14, H-16). 13C NMR (100 MHz, CDCl3) d 172.8 (C]O), 138.9 (C-ar), 128.6(CH-ar), 128.3 (CH-ar), 127.1 (CH-ar), 88.0 (C-8), 79.6 (C-4), 71.9 (C-6), 59.6 (NCH2Ph), 59.4 (C-5), 59.3 (C-2), 49.1 (C-3), 48.2 (C-13), 41.0(C-9), 35.0 (C-11), 29.0 (C-10), 25.9 (NCH3), 24.5 (C-15), 24.2 (CH3),22.6 (C-12), 22.4 (CH3), 18.7 (CH3). HR-ESI-QToF MS (positivemode): m/z calcd for C24H36N3O2 [MH]: 398.2802, found:398.2806.

The synthetic route of 6913-92-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Cecioni, Samy; Aouadi, Kaiss; Guiard, Julie; Parrot, Sandrine; Strazielle, Nathalie; Blondel, Sandrine; Ghersi-Egea, Jean-Francois; Chapelle, Christian; Denoroy, Luc; Praly, Jean-Pierre; European Journal of Medicinal Chemistry; vol. 98; (2015); p. 237 – 249;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

6913-92-4,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.6913-92-4,1-Benzyl-3-pyrroline,as a common compound, the synthetic route is as follows.

N-Benzyl-3-pyrroline 2 (504 muL, 2.64 mmol) was added to a solution of ethyl chlorooximidoacetate (1 g, 6.62 mmol, 2.5 eq) in toluene (20 mL). The flask was heated to 110 C (oil bath) while a solution of Et3N (276.8 muL, 19.8 mmol, 7.5 eq) in toluene (15 mL) was added over 16 hh using a syringe pump. After concentration under reduced pressure, the crude product was purified by silica gel column chromatography (4:1 petroleum ether/EtOAc) to afford compound (+-)-20 (370 mg, 1.35 mmol, 51%). Yellow oil Rf = 0.52 (7:3 petroleum ether/EtOAc). 1H NMR (400 MHz, CDCl3): delta 7.26 (m, 5H, phenyl), 5.20 (dd, 1H, J5,4 = 4.5 Hz, J3,4 = 9.6 Hz, H-4), 4.31 (2 complex q, 2H, J = 7.2 Hz, diastereotopic OCH2), 3.91 (dt, 1H, J2′,3 = 1.0 Hz, J2,3 = 7.1 Hz, J3,4 = 9.5 Hz, H-3), 3.68 (d, 1H, 2J = 13.3 Hz, NCH2Ph), 3.55 (d, 1H, 2J = 13.3 Hz, NCH2Ph), 3.24 (d, 1H, 2J = 11.2 Hz, H-5′), 3.19 (d, 1H, 2J = 9.9 Hz, H-2′), 2.44 (dd, 1H, J2,3 = 7.2 Hz, 2J = 9.8 Hz, H-2), 2.37 (dd, 1H, J5,4 = 4.6 Hz, 2J = 11.2 Hz, H-5), 1.31 (t, 3H, J = 7.2 Hz, Me). 13C NMR (100 MHz, CDCl3): delta 160.7, 152.2 (C=N, C=O), 137.8 (C-ar), 128.5 (2CH-ar), 128.2 (2CH-ar), 127.1 (1CH-ar), 87.4 (C-4), 61.9 (OCH2), 61.1 (C-5), 58.3 (CH2 benzyl), 56.9 (C-2), 51.0 (C-3), 14.1 (CH3). MS m/z = 274.13 for C15H18N2O3; MS-ESI positive mode: 275.1 [M+H]+, 297.1 [M+Na]+.

The synthetic route of 6913-92-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Cecioni, Samy; Aouadi, Kaiss; Guiard, Julie; Parrot, Sandrine; Strazielle, Nathalie; Blondel, Sandrine; Ghersi-Egea, Jean-Francois; Chapelle, Christian; Denoroy, Luc; Praly, Jean-Pierre; European Journal of Medicinal Chemistry; vol. 98; (2015); p. 237 – 249;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem

6913-92-4, 1-Benzyl-3-pyrroline is a pyrrolines compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

6913-92-4, 6.01.28.02 Benzyl-2,5-dihydro-1H-pyrrole-1-carboxylate 43 mL benzyloxycarbonyl chloride in 135 mL dichlormethane was added to 17.6 g 1-benzyl-2,5-dihydro-1H-pyrrole in 135 mL dichlormethane at 0 C. in 60 min. The mixture was stirred 3 h at RT and washed with saturated sodium hydrogencarbonate solution. The organic layer was dried and evaporated. The residue was purified by chromatography on silica gel (hexane/ethyl acetate: 5/1) to give 19.7 g of the desired product. Rt: 16.50 min. (method AG)

As the paragraph descriping shows that 6913-92-4 is playing an increasingly important role.

Reference£º
Patent; GRAUERT, Matthias; BISCHOFF, Daniel; DAHMANN, Georg; KUELZER, Raimund; RUDOLF, Klaus; WELLENZOHN, Bernd; US2013/143870; (2013); A1;,
Pyrroline – Wikipedia
1-Pyrroline | C4H7N – PubChem